Common Reasons to Call a Plumber

Plumbing problems, especially those that you have put off repairing can be expensive. However, it’s important to have a continuous supply of clean, fresh water for everything from cooking to showering, so if you have a plumbing problem, it’s important to have it fixed as soon as possible. Whether it’s a constantly running toilet or a clogged drain, plumbing problems are more common than many people realize. Here are a few of the most common reasons to contact a Plumber Frisco Tx.

No Hot Water

There is nothing more annoying than getting in the shower only to find out that there’s no hot water. There are a number of different causes for this, such as someone else in the house already using it all, but in many situations, it’s the hot water heater itself that needs attention. If you notice the hot water heater isn’t doing its job, the first thing to do is to check the pilot light and the breaker. If neither of these is the problem, it’s important to contact a plumber. The problem may be something as minor as the heating element, but it may be something more serious, such as the need to replace the hot water heater, which requires a plumber.

Running Toilet

Not only is a constantly running toilet annoying, but it can seriously increase your water bill as well. It’s possible for a constantly running toilet to waste as much as 200 gallons of water each day, which can add up quickly. In some situations, you may not need to hire a plumber but you simply need to check to make sure the flap inside the tank is sealing properly. Check to make sure there isn’t any debris that is blocking the flap. If the flap is sealing properly, you should call your plumber to check and see if the float needs replaced or if there is another problem, such as a leak.

Clogged Drain

At some point, everyone deals with a clogged drain. Whether it’s the sink, tub, or shower, a clogged drain prevents the water from flowing out the way it should and if the problem continues without repair, it may lead to more serious problems, such as a burst pipe. To try and clear the clog on your own, the first thing is to check the trap under the fixture; this is the bent piping that is used to catch debris. Turn the water off, disconnect the pipe, clear it, and then replace it. If there is a lot of hair and/or grease, it’s probably the cause of the clog; however, if the trap is clear, it may be a clog further down in the drain or near the sewer. In this situation, you’ll need to call a professional plumber to put a camera down the drain and clear the clog.

Plumbing problems are common in most homes, but you can help prevent serious problems with maintenance. It’s important to make sure you don’t put grease, food, or anything else down the drain that may cause a clog. Be sure to routinely check the dishwasher and washing machine to make sure everything is draining properly and if you do have a plumbing problem, it’s important to fix it as soon as possible.

Leave a Reply

Your email address will not be published. Required fields are marked *